Installing EEGer4 440s

  1. Download the installer for the latest version of the EEGer software from our support site's download page. If using Microsoft Edge, you may need to choose to Keep the file for the download to finish.
    Direct Link: http://support.eeger.com/files/EEGerInstall440s.exe
  2. Make sure the EEG amplifier and EEGer security dongle (green USB) are not connected to the computer.
  3. Once the download is finished, run the EEGer installer. Click NextInstall, OK, and Finish when prompted. The default installation settings are okay and do not need to be adjusted.

Preparing the Computer

  1. Configure the computer for use with the EEGer software.
  2. Connect the EEGer security dongle & EEG amplifier to the computer.
  3. Install the dongle's enabling keyfile.

Configuring EEGer

  1. Open EEGer from the computer's desktop or Windows Start Menu. When opened, several prompts will appear that we can click OK to. 
  2. Username prompt will appear - enter the name of the person who will be using the system (optional).
  3. At this stage, no error messages should be present in the center of the EEGer screen. If errors are present, please repeat the steps under Preparing the Computer above. If errors persist, contact EEG Store for assistance.

Configuring EEGer for the Pocket Neurobics U-Wiz

  1. Open EEGer and navigate to Options>EEGer Configuration Options>Devices from the top toolbar of EEGer's main screen.
  2. Locate option 6 Source of EEG/peripheral data and select Wiz from the list of devices.
  3. Locate option 7 Serial port for data source connection to COM3.
  4. Navigate to the Device Options tab at the top of the menu and check the box for option 29 Inhibit monitoring of electrode.
  5. Click Close preferences window in the bottom-right of the option menu to apply any changes and return to EEGer's main screen.
  6. For additional information about the Pocket Neurobics U-Wiz, see this article.
  7. On some systems, you may need to install the U-Wiz drivers manually. Please follow these instructions to ensure that these driver files are installed.

Installing EKC Files (EOP Session Files)

The EEGer Online Practicum utilizes special session files that must be installed onto the EEGer system. These files will be sent to attendees prior to the first EOP session. If these files are not installed ahead of time, it may prevent the attendee from being able to participate alongside the course. Please follow the instructions in this article to install the EKC client files.

Running a Replay Session

At this stage, EEGer should be fully prepared for the first session of the EEGer Online Practicum! It may be beneficial to run a replay session at this stage to get comfortable with navigating the therapist/wave screen.
Knowledge Base Article Tags:

Sign Up For Our Newsletter